OGX360 internal Install Kit (Kit Only)

This kit allows a Ryzee119-designed OGX360 board to be securely installed inside an Original Xbox.

The OGX360 is a small circuit board which allows you to use a wide range of modern USB controllers on the Original Xbox Console. It was designed by Ryzee119.
https://github.com/Ryzee119/ogx360

For more information about what the OGX360 is, please see the description in my listing for the OGX360 HERE.

This kit takes heavy inspiration from the TEK Nemesis internal OGX360 kit and even uses the STL for the 3D printed caddy. The PCB's that i designed for it are a little cleaner and the implementation of the USB leads is cleaner too. The install method is the same though, so please refer to TEK Nemesis's GitHub for install example photos.
https://github.com/TEK-Nemesis/Original-OGX360-Internal-Conversion-Kit

IMPORTANT INSTALL NOTE:
The JST sockets in the “Y” blocks are designed to fit tightly. If the cable is not pushed in all the way, connection issues can occur. Press the cable firmly into the “Y” block until it clicks into place. The sockets are backed by internal plastic support, so firm pressure will not cause damage.

WARNING:
This kit does NOT work with the Phillips DVD drives. The bulge on the bottom of this DVD drive model will get in the way of this kit. DVD drives aren't locked to the motherboard so they can simply be swapped with a Thomson, Samsung, or Hitachi/LG drive from another Xbox.

WHATS INCLUDED:

• (1) - TEK Nemesis designed caddy (First 10 bases printed by TEK himself)
• (1) - OGX360 interface board with 3" wire to connect "RESET" circuit
• (1) - 5 wire "OGX360 interface to external remote" connection cable
• (1) - External remote with reset button and USB port to connect to the OGX360 board
• (2) - JST 3-way "Y" adapters to connect the ports, OGX360, and motherboard together
• (2) - 10 wire JST cable to connect motherboard to "Y" adapter
• (2) - JST to dual micro USB to connect to the OGX360's controller channels (Arduino's)

This listing is for the Install Kit ONLY and does not include the OGX360 board itself.

If OGX360 boards are available, they can be found here: HERE.