OGX360 internal Install Kit (Kit Only)

This listing is for the Install Kit ONLY and does not include the OGX360 board itself.

This product allows an existing OGX360 to be securely installed inside an Original Xbox.

The OGX360 is a small circuit board which allows you to use a range of modern USB controllers on the Original Xbox Console. It was designed by Ryzee119.
https://github.com/Ryzee119/ogx360

For more information about what the OGX360 is, please see my listing for the external OGX360 HERE.

This kit takes heavy inspiration from the TEK Nemesis internal OGX360 kit and even uses the STL for the 3d printed caddy. The PCB's that i designed for it are a little cleaner and the implementation of the USB leads is cleaner too. The install is method is the same though so please refer to TEK Nemesis's GitHub for install example photos.
https://github.com/TEK-Nemesis/Original-OGX360-Internal-Conversion-Kit

WARNING: This kit does NOT work with the Phillips DVD drives. The bulge on the bottom will get in the way of this kit. DVD drives aren't locked to the motherboard so they can simply be swapped with a Thomson, Samsung, or Hitachi/LG drive from another Xbox.

WHATS INCLUDED:

• (1) - TEK Nemesis designed Caddy (First 10 bases printed by TEK himself)
• (1) - OGX360 interface board with 3" wire to connect "RESET" circuit
• (1) - 5 wire "OGX360 interface to external remote" connection cable
• (1) - External remote with reset button and USB port to connect to the OGX360 board
• (2) - JST 3 way "Y" adapters to connect the ports, ogx360, and motherboard together
• (2) - 10 wire JST cable to connect motherboard to "Y" adapter
• (2) - JST to dual micro USB to connect to the OGX360's controller channels (Arduino's)